adjustment: Used to adjust the thickness of the mold to achieve the required clamping force. Shift the selection switch to the adjusting position and manually operate the adjusting die in and out switch. The opening and closing die are in a slow state.
(2) manual: it is generally used in trial run, trial run and production start-up stage. Turn the selector switch to manual, position, close the safety door, each operation of a switch, the corresponding completion of an action.
(3) semi-automatic: a common production operation mode. Turn the selection switch to the“Semi-automatic” position, close the safety door to complete the mold, injection, pressure, pre-plastic, cooling, open the mold, product ejecting (not falling off) open the safety door to take out the product to complete a single cycle, closed the safety door cycle again.
(4) Full-automatic: turn the selector switch to the“Full-automatic” position, determine the timing of the ejecting mode, one or more times to close the safety door, the process of the various actions in accordance with the original program cycle, requires a reliable automatic mold release.
plastic injection machine
2024 04/25